$60.19 Buy It Now or Best Offer
free,30-Day Returns
Seller Store
() %,
Location: Ontario, California, United States
Ships to: US,
Item: 253571586622
eBay 1.Fit For Nissan Titan 2004-2015 Infiniti QX56 2004-2010 2.Package Includes: 2x Part# Front Upper Ball Joints – K80994 2x Part# Front Lower Ball Joints – K80647 2x Part# Front Stabilizer/Sway Bar End Links – K750146 2x Part# Front Inner Tie Rods Ends – EV800216 1x Part# Front Left Outer Tie Rod End – ES800031 1x Part# Front Right Outer Tie Rod End – ES800032 Notes For 2004-2014 Nissan Armada Titan 10PCS Front Ball Joints Sway Bars Tie Rod Link 1.Fit For Nissan Titan 2004-2015 Infiniti QX56 2004-2010 2.Package Includes: 2x Part# Front Upper Ball Joints – K80994 2x Part# Front Lower Ball Joints – K80647 2x Part# Front Stabilizer/Sway Bar End Links – K750146 2x Part# Front Inner Tie Rods Ends – EV800216 1x Part# Front Left Outer Tie Rod End – ES800031 1x Part# Front Right Outer Tie Rod End – ES800032 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. Picture(A) The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. Picture(B) 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. Picture(C) 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. Picture(D) 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. Picture(E) 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. Picture(F) 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. Picture(G) 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. Picture(A) 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. Picture(B) 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. Picture(C) 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. Picture(D) 6.Press stabilizer link at suspension strut out of bracket. Picture(E) 7.Insert new stabilizer link at suspension strut. Picture(F) 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(G) 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(H) 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Picture(A) Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. Picture(B) 3.Dismount the front underride guard. Picture(C) 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. Picture(D) 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. Picture(E) 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. Picture(F) 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. Picture(G) 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. Picture(H) 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. Picture(I) 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Frequently Asked Questions (1).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. (3).What happens if I don’t replace ball joints? If you don’t want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. (4).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. (5).Why should I get my tie rods inspected on a regular basis? If you don’t get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it’s possible that bad tie rods may be the culprit. Your vehicle’s tires will also show uneven wear on the inside and outside edge of the tire when there’s a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. (6).Vibrations One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. (7).Shaking As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom. (8).Wandering If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may “wander” as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. (9).What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns. (10).What happens when a sway bar breaks? Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. Item Specifics Placement on Vehicle : Front Type : Sway Bar Link Universal Fitment : No Custom Bundle : Yes Interchange Part Number : K80994, K80647, K750146, EV800216, ES800031, ES800032 OE/OEM Part Number : Suspension Steering Tie Rod Ends Linkages Assembly,Ball Joints Bundle Description : Ball Joint,Control Arm ,Sway Bar,Tie Rod End Superseded Part Number : Front Driver and Passenger Side Replacement Manufacturer Warranty : 10 Year Brand : topcn-autoparts UPC : Does Not Apply Manufacturer Part Number : TA81309901P Adjustable : Yes Greasable or Sealed : Greasable Kit Included : 10 Pieces Surface Finish : Premium Quality Cross Part Number : 545007S001, 54500EA00A, 54500ZR00A, 545017S001 Cross Reference Part Number : 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Suspension Grade : Standard Fitment : For Nissan Armada Titan Suspension Grade : Standard Fitment : For Nissan Armada Titan Custom Bundle : Yes Features : Greasable Finish : Coated Material : Alloy Steel Mounting Style : Bolt-On Cotter Pin Hole : Yes Discount Targeted Discounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means Topcn-autoparts won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Topcn-autoparts has the final power of interpretation of all the above Targeted Discount Terms and Procedures. Shipping WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Warranty Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).Topcn-autoparts carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).Topcn-autoparts promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise Topcn-autoparts has the right to refuse any replacement requests. (5).Topcn-autoparts promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise Topcn-autoparts has the right to refuse any replacement requests. (6).Topcn-autoparts carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).Topcn-autoparts has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. Return (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Best Sales Upstream & Downstream Oxygen O2 02 Sensor For 2001-2005 Honda Civic 1.7L D17A7 USD 23.81 Throttle Body for Dodge Avenger Journey Caliber Jeep Patriot Compass 2.4L 2.0L USD 46.99 2x Front Hood Lift Supports Shocks Struts For Dodge Ram 1500 2500 3500 4500 5500 USD 17.74 2x Front Hood Gas Lift Supports Struts Shocks Springs For Dodge Ram 02-10 4364 USD 17.69 2 For Dodge Challenger 2008-2014 Keyless Entry Remote Control Car Key Fob USD 18.35 Newly Listed LH Left Power Driver Side View Mirror TO1320179 For 2003-2008 Toyota Corolla USD 31.00 Brand New O2 Oxygen Sensor Downstream/Post For Land Rover Range Rover LR3 13509 USD 17.99 Manual Unfold LH Side Mirror For 05-11 Dodge/Mitsubishi Dakota Raider 55077621AC USD 33.49 Power Heated Signal Passenger Right RH Side View Mirror Fits 2003-2007 GMC Chevy USD 55.29 Right Power Memory Heated Chrome Signal Passenger Mirror For GM Pickup USD 73.29 Terms & Contact Shipping Policy Payment Policy Return Policy FAQ About Us For 2004-2014 Nissan Armada Titan 10PCS Front Ball Joints Sway Bars Tie Rod Link 1.Fit For Nissan Titan 2004-2015 Infiniti QX56 2004-2010 2.Package Includes: 2x Part# Front Upper Ball Joints – K80994 2x Part# Front Lower Ball Joints – K80647 2x Part# Front Stabilizer/Sway Bar End Links – K750146 2x Part# Front Inner Tie Rods Ends – EV800216 1x Part# Front Left Outer Tie Rod End – ES800031 1x Part# Front Right Outer Tie Rod End – ES800032 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. Picture(A) The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. Picture(B) 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. Picture(C) 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. Picture(D) 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. Picture(E) 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. Picture(F) 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. Picture(G) 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. Picture(A) 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. Picture(B) 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. Picture(C) 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. Picture(D) 6.Press stabilizer link at suspension strut out of bracket. Picture(E) 7.Insert new stabilizer link at suspension strut. Picture(F) 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(G) 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(H) 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Picture(A) Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. Picture(B) 3.Dismount the front underride guard. Picture(C) 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. Picture(D) 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. Picture(E) 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. Picture(F) 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. Picture(G) 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. Picture(H) 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. Picture(I) 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Frequently Asked Questions (1).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. (3).What happens if I don’t replace ball joints? If you don’t want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. (4).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. (5).Why should I get my tie rods inspected on a regular basis? If you don’t get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it’s possible that bad tie rods may be the culprit. Your vehicle’s tires will also show uneven wear on the inside and outside edge of the tire when there’s a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. (6).Vibrations One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. (7).Shaking As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom. (8).Wandering If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may “wander” as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. (9).What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns. (10).What happens when a sway bar breaks? Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. Item Specifics Placement on Vehicle : Front Type : Sway Bar Link Universal Fitment : No Custom Bundle : Yes Interchange Part Number : K80994, K80647, K750146, EV800216, ES800031, ES800032 OE/OEM Part Number : Suspension Steering Tie Rod Ends Linkages Assembly,Ball Joints Bundle Description : Ball Joint,Control Arm ,Sway Bar,Tie Rod End Superseded Part Number : Front Driver and Passenger Side Replacement Manufacturer Warranty : 10 Year Brand : topcn-autoparts UPC : Does Not Apply Manufacturer Part Number : TA81309901P Adjustable : Yes Greasable or Sealed : Greasable Kit Included : 10 Pieces Surface Finish : Premium Quality Cross Part Number : 545007S001, 54500EA00A, 54500ZR00A, 545017S001 Cross Reference Part Number : 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Suspension Grade : Standard Fitment : For Nissan Armada Titan Suspension Grade : Standard Fitment : For Nissan Armada Titan Custom Bundle : Yes Features : Greasable Finish : Coated Material : Alloy Steel Mounting Style : Bolt-On Cotter Pin Hole : Yes DiscountShippingWarrantyReturnFeedback Targeted Discounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means Topcn-autoparts won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Topcn-autoparts has the final power of interpretation of all the above Targeted Discount Terms and Procedures. WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).Topcn-autoparts carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).Topcn-autoparts promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise Topcn-autoparts has the right to refuse any replacement requests. (5).Topcn-autoparts promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise Topcn-autoparts has the right to refuse any replacement requests. (6).Topcn-autoparts carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).Topcn-autoparts has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Copyright of Topcn-autoparts. All rights reserved.
Frequently Asked Questions About For 2004-2014 Nissan Armada Titan 10PCS Front Ball Joints Sway Bars Tie Rod Link in My Website
www.techmen.net is the best online shopping platform where you can buy For 2004-2014 Nissan Armada Titan 10PCS Front Ball Joints Sway Bars Tie Rod Link from renowned brand(s). www.techmen.net delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
What are the best-selling For 2004-2014 Nissan Armada Titan 10PCS Front Ball Joints Sway Bars Tie Rod Link on www.techmen.net?
www.techmen.net helps you to shop online and delivers Guess to your doorstep. The best-selling Guess on www.techmen.net are: Guess Logo Faux Fur Shoulder Bag Black Multi Gold Guess Bag Handbag Shopper Shoulder Bag Ginevra Society Tote Rosewood New Guess Women’s Clelia Mini Crossbody Handbag Guess Iwona Women’s Handbag GUESS Women’s La Femme Handbag Slate Embossed Fold-Over Flap Shoulder Bag Charms Guess Hartley Cold Shoulder Top in Leopard Print Size S New With Tags Guess Women’s 57mm Biege Sunglasses GF0427-27W GUESS Ophelia Rose Floral Satchel Handbag Purse Handles / Crossbody Strap Guess Downtown Cool Convertible Mini Crossbody Bag Pink Chain Strap Lock Charm FRIENDS WITH YOU x GUESS (2021) Official Collab Embroidered Boxy T-Shirt Large Dark Gray Black Patent Leather GUESS Purse Heart Handles Crystal Rhinestone Y2K Guess Handbag, Los Angeles, New Guess TShirt Vtg Y2K Sparkly Punk Rock Glam Tee Purple Semi Sheer Tattoo Art L Guess Womens Loren Blue Ruffled Midi Formal Cocktail and Party Dress S BHFO 3929 Free Ship USA Chic Handbag GUESS SATCHEL Havana Straw Ladies Tangerine Bag Love Guess Women’s Lace-Trim A-Line Dress Size 14 Guess Womens Sleeveless Floral Print Dress Size 6 MSRP $108.00 Guess Factory Gradient Smoke Rectangular Men’s Sunglasses GF5107 01B 54 GUESS Cross Body Satchel With Top Handles Brown Tan Logo With Silver Accents GUESS by MARCIANO Golden Bronze Mini Clear 12″ Tote Y2K Vintage NEW Guess Womens White Viper Girl Crewneck Tee Graphic T-Shirt Top XS BHFO 9566 Guess Embossed Crocodile Alligator Tan Bag Large Purse Handbag Guess Womens SX821478 Black Monogram Leather Chain Strap Phone Crossbody Bag Womens Leather Bags GUESS VINTAGE handbag Shoulder bag Metallic Purple Leather GUESS Silver Studded and Rhinestones Clutch Purse Small 10” X 6” Missing Strap Guess Dream Tote Shoulder Bag in Brown GUESS MONOGRAM GOLD METALLIC Y2K SHOULDER HANDBAG Guess Dress NWT Guess Cactus Flower Ombre Maxi Dress Size XS Extra Small Snakeskin High Low Guess Women’s Noelle Elite Tote Handbag Guess LA Blouse Gold Chain Collar Purple Long Sleeve Top Gisela Large Logo Shirt Guess Naya Tote & Wristlet in Stone Multi NEW W/TAGS Guess Women’s Purse 8.5×6 X 4 In Wide Pre Owned Barely Used Womens Size XS Extra Small Black Short Sleeve Shirt / Top by Guess ~ Silver NWT New GUESS Black Tee Gothic Crown Logo Graphic Print Slim Fitted Sz M GUESS 220089 Authentic Men Leather Billfold Wallet with Valet ~ BLACK Guess Handbag-Shoulderbag Black Bowling Style Zip Top (ANGOLA – Ret.$70) NWT-NEW Guess Womens Blk Leather Clutch/Shoulder Bag/gold Chain Pre-owned NEW Guess Crossbody Handbag New ladies crossbody bag Guess shoulder bag handbag trend fashion women’s bag Guess Y2K Vintage Crossbody Mini Bag Rhinestone Heart Chain GUESS small gun metal gray faux leather satchel, purse, bag, handbag. GUESS Women’s Size Medium Shoulder Bag Light Brown Tan Vachetta GUESS Women’s Top Lace Neckline Stretch Pullover White Short Sleeve Size Small “G By Guess” Black Faux Leather Women’s Handbag, Pre-Owned (g) Purse New GUESS Los Angeles Women’s Short Sleeve T-Shirt X-SMALL Gray w/White, Pink Guess Womens Dark Gray Monogram Shoulder Strap Backpack Guess Grey/Black Women’s Shoulder Bag With Leather Strap NEW GUESS Logo Black White Nylon Gym Weekend Travel Duffle Bag Handbag Guess Women Evan Blush Quilt Faux Leather Crossbody Mini Backpack NEW FLAWS Guess Y2K Faux Alligator Leather Handbag Purse Pink Satin Liner Rhinestone Guess Seductive Homme Noir by Guess 3.4 oz EDT Cologne for Men New In Box Women’s Guess Leather Brown Handbag GUESS Purse Handbag Red Zip Double Handle Leather EUC Vintage Guess Womens Medium Sleeveless Top 90s Minimalist Retro Office Sheer USA Women’s Y2K Guess Bag NWOT GUESS Womens Lace Sheer Intimates Bodysuit Guess Shawna Cali Cognac Multi-Color Faux Leather Crossbody/Satchel – VG719005 G By Guess Clutch Bag Black Faux Leather Flap Envelope Zip Chain Guess los angeles size medium red/black short sleeve scoop neck tshirt Guess Slim Flapped Crossbody Bag Black Faux Leather Purse W/Logo Panel Guess Women’s Pink Sheer Tshirt Size Medium Y2K Guess Small Black Handbag with Silver Hardware Guess Women’s Purse Hand Bag Shoulder Bag Beige Faux Snake Print Small Pre-Owned GUESS PENN MAR MINI Crossbody With COIN Purse ; Women Shoulder Bag-BLACK 50 Cent Guess Who’s Back New Sealed Official Debut Mixtape CD Very Rare Womens Guess Betty Boop Crop Top Guess SG882798 Unisex Large Coal/Black Allover Logo Print Insignia Backpack Guess Vintage Lavender White Snake Skin Style Baguette Handbag Purse Guess Shirt Womens Medium V-Neck Classic Embossed Logo Short Sleeve Ladies NEW GUESS Los Angeles Women’s Short Sleeve T-Shirt Beige Size Small GUESS Women’s Red Crossbody Bag Size 10×8 Guess Handbag + Cosmetic Pouch 2pc Set Floral Kiss Me Pink Magnet Closure Tote Guess Los Angeles Mini Backpack LARGE RED GUESS ? PATENT FAUX LEATHER TWO HANDLED HAND BAG CLASSIC G GUESS WOMEN’S CRYSTAL RHINESTONE LOGO FULL ZIP FRONT TOP STRETCHY M NWT Guess Women’s 61mm Rose Gold Sunglasses GF0408-28F Guess Women’s 99mm Brown Sunglasses GF0400-32B Guess Womens Top Size M Red Solid Blouse Short Sleeve Cotton Shirt Casual NWT GUESS Vegan Leather RARE “Coast Babies” Camel Tan Mini Tote Purse Bag VTG GUESS Satin Purse 90s Style Lilac Shoulder Grommet Bag Pre-Owned GUESS DARE by Guess 3.4/3.3 OZ / 100 ML EDT SPRAY For Women Genuine Guess Black Satchel Guess Shoulder Handbag Purse PU Vegan Leather Stud Accented G Guess Semi Sheer Top Chateau Rose Sweetheart Keyhole Back Floral Top Size XS Sexy Skin Sweet Sugar by Guess for Women – 8.4 oz Fragrance Mist Guess Los Angeles Shirt Women Size XS Pearl Snap Long Sleeve Floral Cottagecore NWOT Black Guess Women’s Pink Floral Leather Crossbody Handbag w/ Coin Purse Guess Hand Bag Woman’s Red Mary Poppins Bag W/Separate Lower Zipper Compartment Vintage Y2K GUESS Handbag Monogram Shoulder Bag Canvas Suede 90s Logo Bling Guess Eco Jules Bodysuit Size L GUESS Womens Green Woven Tie Shirred Buttoned Sleeveless Scoop Neck Peplum Top L GUESS Satchel/Handle Bag medium perfect condition pink white interior Guess Whos Coming to Dinner – GOOD GUESS Black Wristlet Bag Clutch Purse Logo Wallet Black Guess Shoulder Bag Guess Cream Embroidered Top off the Shoulders UK8 XS Vintage GUESS USA Brown Leather Cross Body Bag – Hipster Purse Camera NEW Guess Dusty Mauve Cuba Shoulder Bag Tote 10″H x 15.5″W x 6″D Guess Gold Eau de Parfum Spray 50 ml. 1.7oz vintage Mens Pullover Fleece Hoodie